Publicidad
Idiomas disponibles
Idiomas disponibles
1. Introduction
This user manual contains important
information. We therefore suggest
that you keep it stored in a safe
place.
We congratulate you on having
chosen a mesh base that fulfills all
your personal requirements. The
mesh bases have varying degrees
of adjustability, according to type.
The mattresses vary in terms of the
use of materials and functions.
Thanks to their open structure,
mesh bases offer good ventilation,
resulting in a fresh and hygienic
sleeping environment.
All Auping mattresses can be used
on non-adjustable or adjustable
mesh bases.
mattresses
comprise comfort zones
which result in individual
adaptation to the weight
distribution of your body. The
shoulder zone is slightly softer,
Safety instructions
while the seat section in contrast
contains extra reinforcement. This
manner of zoning provides
additional comfort and improved
support, both when sitting and
lying on the mattress.
Mattress connectors are used to
attach the mattress to the mesh
base. This prevents the mattress
from
adjusting the bed, at the same time
ensuring that it effortlessly follows
the movements of the mesh base.
The mattresses are asymmetrically
built using various materials, and
therefore need not be turned over.
1.1 Technical specifications
Control box:
- Input 230 V AC, 50Hz
(or 220/240/110 V AC, 50/60 Hz
depending on the modell).
Drive motor:
- Leg, neck and back motor: 24 V
Maximum
time 2 minutes per 20 minutes (2
The
minutes on, 18 minutes off).
Wireless remote
control
wireless handset; - 2
LR03 batteries.
Weight (size 90x200 cm)
- mesh base 2M: 36 kg
- mesh base 3M: 38 kg
1.2 Structure of the mesh base
1. Electrically
2. Electrically adjustable head end
sliding
downward
DC
continuous
- 3 Volt
adjustable
section
while
EN
2
operating
back
Publicidad
