Haojue DR160 2023 Manual De Uso página 105

5. Firmly lock the nut 2 and 5, and then mount the
rubber bushes 1.
BCAUTION
It's prohibited to intentionally increase the cable
clearance 4.
BCAUTION
During the operation of vehicle, the friction plate
will be worn to a certain degree to reduce
the cable clearance so that the timely checking
and adjustment is required (Please refer to the
maintenance schedule for the detailed checking
period. The special attention shall be paid within
the first 1000km), otherwise it will result in clutch
slip.
BCAUTION
The excessive or insufficient cable clearance of
clutch will easily result in wear and malfunction of
clutch and gearshift mechanism. Upon detection of
abnormal cable clearance (The clearance 4 is out
of 3–5mm range), clutch slip, or weak acceleration,
adjust timely.
Haojue DR160/DR160S 99011H2J024H000 V04 ES+EN+FR 2020-1-17
40
Haojue DR160/DR160S 99011H2J024H000 V04 ES+EN+FR 2020-1-17
BCAUTION
If the cable clearance can't be adjusted to required
value due to excessive wear of clutch frication
plate or the slip is still present after adjustment,
timely replace the friction plate, otherwise the other
clutch parts will be damaged.
THROTTLE BODY
The throttle limit screw of the throttle
body has already been set, and
can not be adjusted. Check the
vehicle's idle speed is stable, if the
idle speed is not stable, you need
to your authorized Haojue dealer for
maintenance.
THROTTLE CABLE PLAY
1. Remove the rubber bush(s) along the throttle cable.
2. Loosen lock nut 1.
3. Turn the adjuster 2 so that the throttle cable has
0.5–1.0mm play.
(105)
EN
0.5–1.0mm
(105)