Publicidad
Idiomas disponibles
Idiomas disponibles
BWARNING
Crosswinds usually exist at tunnel exits or valleys
or when big vehicles overtake. Drive calmly and at
reduced speed at these times.
BWARNING
Obey traffic rules and speed restrictions.
STARTING THE ENGINE
Before attempting to start the engine, make sure:
The transmission is in neutral. The neutral position
•
indicator on the dashboard will be lit.
The engine stop switch is at the "*" position.
•
Insert the key into the key hole on the ignition switch
•
and turn it clockwise until the "*" position.
Grasp the clutch lever firmly.
•
BWARNING
Habitually put the shift lever in the neutral position,
close throttle grip completely and firmly grasp the
clutch lever before starting the engine to avoid
rushing forward in case of the mistaken operation
on startup.
Haojue DR160/DR160S 99011H2J024H000 V04 ES+EN+FR 2020-1-17
24
Haojue DR160/DR160S 99011H2J024H000 V04 ES+EN+FR 2020-1-17
When the engine is cold
1. Grasp the clutch lever.
2. When the throttle grip is on
its original position, open the
throttle to 1/8 of its limit when
necessary.
3. Press the electric startup button
"#".
4. Keep the engine running until fully warmed up after
startup.
BCAUTION
The sufficient preheating of a cold engine after
start up can provide the necessary conditions for
the normal running of the engine. If the engine
is not sufficiently preheated, and if the motorcycle
travels repeatedly for only a few kilometers each
time, normal engine performance will be affected
and the service life of the engine oil will be
shortened. When the temperature is low, sufficient
preheating of the engine is even more important.
NOTE: The colder the weather, the longer preheating
time the engine needs. Riding after the engine is fully
preheated will cause the engine to suffer less wear.
NOTE: When the throttle opening more than 3/10, the
vehicle not start, therefore, should make throttle opening
less than 3/10 when start.
(89)
Throttle opening
EN
(89)
Publicidad
