Publicidad
Idiomas disponibles
Idiomas disponibles
(80)
Haojue DR160/DR160S 99011H2J024H000 V04 ES+EN+FR 2020-1-17
ADJ button
or SEL button
and then press the ADJ button
seconds at the same time. The oil change indicator light
will flash 2 times before turning off.
Turn-off thereafter:
If the total mileage is 1200km, do the "Turn-off Operation"
when the LCD screen displays "2000" by flashing, then
the oil change light will automatically light up when your
motorcycle has a total mileage of 1200+2000; that is, the
total vehicle mileage is 3200km.
NOTE: After that, you must turn off the oil change indicator
light according to "Turn-off Operation" after changing the
oil.
MALFUNCTION INDICATOR
When the ignition switch is turned from "%" position to "*"
position, the malfunction indicator comes on, as soon as
the engine starts, the malfunction indicator should go out.
If the malfunction indicator comes on and remains lit, have
EN
your authorized Haojue dealer inspect your motorcycle as
soon as possible.
ADJ BUTTON
The ADJ button is used with the SEL button
oil change indicator
indicator"
section.
SEL BUTTON
The SEL button is used to shift between the TOTAL meter
display and the TRIP meter display. And it can also be
used when the oil change indicator
(80)
Haojue DR160/DR160S 99011H2J024H000 V04 ES+EN+FR 2020-1-17
to switch "2000" or "3000",
and SEL button
G
when the
goes out. Refer to the "oil change
goes out. Refer to
the "oil change" section.
for 2
Shifting the TOTAL and TRIP meter:
•
Press the SEL button.
TRIP meter reset:
•
Shift to TRIP meter display mode, and press the SEL
button for more than 2 seconds.
NEUTRAL GEAR INDICATOR LIGHT
When the gear is in the neutral position, this indicator will
light up. If others, this indicator will be off.
HIGH BEAM INDICATOR LIGHT
The high beam light indicator will light up when the high
beam headlight is turned on.
LEFT TURN SIGNAL INDICATOR LIGHT
When the turn signal switch is pushed to left, the panel
left turn signal indicator light will flicker accordingly.
NOTE: If the turn signal fails to work due to a broken
light, internal circuit failure or faulty wire connection,
the indicator on the dashboard will remain light up
continuously or flicker at a high frequency.
LEFT HANDLE SWITCHES
15
N
9
=
Publicidad
