Dräger X-act 7000 Manual Tecnico página 43

3.1.7.4 Completion
Once the measurement has been completed, the MicroTubes are once again
removed from the gas path and the result is shown in the display. The MicroTubes
are transported to the new operating position by the drive.
3.1.8 Settings
Press the
The following configurations can be set and changed in this PIN-protected menu:
– Date
– Date format
– Time
– PIN
– Language
– Device reset
Standard password: 0001
3.1.9 Display
The display is broken down into 3 sections (graphic D/2) whose display varies
depending on the setting and device status.
Upper display section (graphic D/2a)
The time and battery charge status are always displayed.
The following icons may also be displayed:
|
Technical Manual
softkey (graphic D/1) to open the menu and select "Login".
03:30
Logout
Date & Time
Set Date Format
Set PIN
Select Language
Battery is fully charged
10 of 10 unused Dräger Micro-
Tubes in the device, 10 mea-
surements possible
®
X-act 7000
Description
Battery is empty
All Dräger MicroTubes used
|
en
43