Dräger X-act 7000 Manual Tecnico página 61

7.1.4 Data logger
The data logger menu item can be used to read the last 100 measurement results
out of the X-act 7000 and export it as a text file in CSV format. The text file can be
opened with conventional spreadsheet software.
7.1.5 Measurement locations
The Measurement locations menu item can be used to individually configure up to
20 measurement locations with 2 lines each, which can then be assigned to the
result after a measurement. To do so, the names of the measurement locations can
be entered in the field and then transferred to the X-act 7000 by clicking on the
button. The process takes some time. An integrated analysis of all characters and
|
Technical Manual
®
X-act 7000
|
en
Configuration
61