Kärcher FC 7 Cordless Premium Manual De Instrucciones página 13

The roller speed and the amount of
water are increased.
The cleaning level 2 display lights
up.
Note
The setting of cleaning level 1 or clean-
ing level 2 depends on the surface to
be cleaned (e.g. wood or stone floor).
The device is set to cleaning level 1 for
the initial start-up.
After an interruption in work or restart-
ing, the last cleaning level setting is al-
ways activated.
4. If necessary, activate the boost func-
tion for cleaning stubborn dirt (see
also chapter General information on
operation).
Battery run time
The display "Battery" shows the bat-
tery run time:
● 3 LEDs light up - 3/3 (full) battery run
time
● 2 LEDs light up - 2/3 battery run time
● 1 LED lights up - 1/3 battery run time
Acoustic or optical signals warn of an
empty battery.
● Approx. 5 minutes before the bat-
tery is empty, an acoustic signal
sounds twice and the bottom LED
flashes.
● Approx. 1.5 minutes before the bat-
tery is empty, an acoustic signal
sounds twice and the bottom LED
continues to flash.
● After the battery is empty and the
device has switched off, the bottom
LED flashes faster for 60 seconds.
English
13