Emptying the waste water tank
● If the waste water tank is full, the dis-
play "MAX" (red) lights up and an
acoustic signal sounds.
● After 60 seconds, an acoustic signal
sounds for the second time and the
device switches off.
● As soon as the device is switched
off, the display "MAX" (red) flashes
for 10 seconds.
● As long as the waste water tank is
full and the display "MAX" (red)
lights up, the process starts again
and the following two steps are re-
peated:
a The device can be switched on
again.
b The device runs for another 60
seconds and then switches off
again.
1. Press the ON / OFF switch.
The device switches off.
2. Press the unlocking button for the
waste water tank with your foot and
lift the device.
14
The waste water tank detaches from
the device.
3. To empty the waste water tank, do
not use the top cover to transport it,
but use both hands horizontally on
the narrow sides.
4. Empty the waste water tank through
the opening in the cover. In the case
of stubborn soiling, remove the cov-
er of the waste water tank, and rinse
out the waste water tank with tap
water.
5. Insert the waste water tank (see
chapter Inserting the waste water
tank).
English