Publicidad
Idiomas disponibles
Idiomas disponibles
• Opening the door for long periods can cause a significant increase of the
temperature inside the appliance.
• Clean regularly the inner surfaces.
• If the appliance is left empty for long periods, switch off, defrost, clean, dry and
leave the door open to prevent mount developing within the appliance.
INSTALLATION
IMPORTANT! For electrical connection carefully follow the instructions given in specific
paragraphs.
• Unpack the appliance and check if there are damages on it. Do not
appliance if it is damaged. Report possible damages immediately to the place you
bought it. In that case retain packing.
• It is advisable to wait at least four hours before connecting the appliance to allow the
oil to flow back in the compressor.
• Adequate air circulation should be around the appliance, lacking this leads to
overheating. To achieve sufficient ventilation, follow the instructions relevant to
installation.
• Wherever possible the spacers of the product should be against a wall to avoid
touching or catching warm parts (compressor, con-denser) to prevent possible burn.
• The appliance must not be located close to radiators or cookers.
• Make sure that the mains plug is accessible after the installation of the appliance.
SERVICE
• Any electrical work required to do the servicing of the appliance should be carried out
by a qualified electrician or competent person.
• This product must be serviced by an authorized Service Center, and only genuine
spare parts must be used.
ENERGY SAVING
• Don't put hot food in the appliance;
• Don't pack food close together as this prevents air Circulating;
• Make sure food don't touch the back of the compartment;
• If electricity goes off, don't open the door;
• Don't open the door frequently;
• Don't keep the door open for too long time;
• Some accessories, such as shelves, can be removed to get larger storage volume
and lower energy consumption.
61
connect the
Publicidad
