Publicidad
Idiomas disponibles
Idiomas disponibles
DECREASE TEMPERATURE
K3: Press the button once, the LED display will flash indicating the current temperature.
Press again to set the temperature. 1 touch will reduce the temperature by 1 degree. The
blink stops after 5 seconds without action on your part, and the newly set temperature is
recorded. The LED display then shows the actual inside temperature.
MODE FAHRENHEIT/CELSIUS
K4: Switch the temperature display between Fahrenheit/Celsius by pressing the button.
Please do not open the door too often as this will disrupt the operation of the temperature
sensors. The wine cooler automatically adjusts moisture and condensation levels within the
wine cooler as required.
ATTENTION
When the temperature sensor is failing due to power outage or bug, an error code appears.
E1 internal temperature problem
E2 ambient temperature problem
CE communication problem
75
Publicidad
