Publicidad
Idiomas disponibles
Idiomas disponibles
IV MAINTENANCE AND CLEANING
A. DEFROSTING
Your wine cooler is designed with a "natural" defrosting system. When the engine is shut
down, the refrigerated surfaces of the wine cooler automatically defrost. The de-icing water
descends into a drainage container near the compressor at the back of the wine cooler. This
water is evaporated by the heat produced by the compressor.
IMPORTANT: Keep the drain and gutter clean to prevent it to clog and water to flow
inside the wine cooler.
B. CLEANING
Before cleaning or restarting, unplug at the socket.
Never use abrasive products or sponges with scrapers for cleaning inside or outside your
device.
•
Remove all accessories (e.g. shelves). Wash them with a damp cloth with warm water
with a mild, odorless detergent (an unscented dish liquid, for example).
•
Wash the interior walls in the same way; take special care of the shelves.
•
Wash the door seal without omitting to clean also under the door seal
•
Reconnect the device and get it back into operation.
Occasionally, dust the condenser at the back of the unit; a build-up of dust could reduce the
performance of the unit.
At certain times of the year, condensation on the door may occur. If this happens, wipe the
water from the door and avoid opening the door of the wine cooler often as this amplifies
the difference between the inside of the wine cooler and the ambient temperature.
In case of prolonged absence, empty and clean the appliance; keep the door ajar for the
duration of non-use.
IMPORTANT!
When the wine cooler is not used:
•
Unplug the appliance.
•
Remove all objects inside.
•
Clean and dry the interior space of the wine cooler per the above instructions.
•
Leave the door slightly ajar to avoid mold.
77
Publicidad
