Publicidad
Idiomas disponibles
Idiomas disponibles
1
About this document
The original language of this document is German.
Software version: S168025-504 or later.
This document is intended for all persons who work with
the secondary controller. This document is valid for the fol-
lowing controls:
•
mPro400GCD-S
•
mPro400GCD-SH
•
mPro400GCD-SH-STO
•
mPro400GCD-S-STO
Related documents
No.
Type
P2349HW
mPro400GCD-S(H) global nutrunner con-
trol, secondary
P2369HW
mPro400GCD-S(H)-STO
P2280SW
mPro400GC global control
Symbols in the text
Italic
Identifies menu options (e.g. diagnostics),
input fields, control boxes, options fields
or dropdown menus.
>
Denotes the selection of a menu option
from a menu, e.g. File > Print.
<...>
Denotes switches, pushbuttons or the
buttons of an external keyboard, e.g.
<F5>.
Denotes filenames and paths, e.g.
Courier
setup.exe.
•
Denotes lists, Level 1.
-
Denotes lists, Level 2.
a)
Denotes options.
b)
→
Denotes results.
1. (...)
Denotes a sequence of handling steps.
2. (...)
Denotes an individual handling step.
Apex Tool Group
2
Safety
Read all safety instructions and directions.
Keep this Instruction Manual in a safe place for future
use!
2.1 Warnings and notices
General information includes application
tips and useful information, but no warn-
ings against hazards.
2.2 Basic requirements
Only operate the controller after you have read and fully
understood this document.
Keep this document in a safe place for future use! The
safety instructions must be accessible to the operator at all
times. They must be presented and made accessible to all
persons using the device.
2.3 Intended use
The software is a part of the Cleco Production Tools tight-
ening system and is intended exclusively for industrial use
in fastening processes.
2.4 Operator training
The software must only be used by qualified and trained
persons. The personnel must be instructed by qualified
1
employees
of Apex Tool Group.
2.5 Product Description
The secondary controller is an extension module to the
master or primary controller and is needed to operate
another corded tool. It features I/Os for local error check-
ing, peripherals and an LCD for user feedback and fault
elimination.
The software interface of the secondary
controller is only displayed in English.
1.) Due to their professional training, knowledge,
experience and understanding of the circumstances
involved in this kind of work, suitably qualified per-
sonnel are able to identify potential hazards and to
initiate appropriate safety measures. Qualified per-
sonnel must comply with regulations.
P2379PM | 2019-04
1
EN
5
Publicidad
