FEATURES
FINGER-FRIENDLY DESIGN
Resists curious fingers.
STURDY BASE
For wobble free airflow.
SILICON FEET
Non-marking feet added
for stability.
8
English
BASE ASSEMBLY
Screwdriver required.
1. Assemble the two base halves together, pressing the two halves
TOUCH-SENSITIVE CONTROLS
together until flush. You should hear a slight click when fully
with auto-dimming digital display
connected.
ENERGY-SAVING TIMER
3, 6, 9, 12 hour timer.
MULTIPLE SPEEDS
4 speed settings for
every comfort level.
2. Assemble the base to the bottom of the tower. There is an alignment
CARRY HANDLE
pin (A) located on the bottom of the tower and an alignment recess
(B) located on the base. An arrow on bottom of base indicates
alignment recess location. To ensure correct assembly, position base
onto bottom of tower with (A) and (B) aligned. Take care that power
cord is routed through hole on base before moving to next step in
assembly.
3. Attach base to tower using 8 screws provided.
4. Route the powercord through cord path
located on bottom of base.
A
B
x8
9
English