Publicidad
Idiomas disponibles
Idiomas disponibles
USING ALEXA
Once connected to Amazon Alexa, your OSCR37 AE can be controlled via your voice with any Alexa Echo device or the
Alexa App on your phone. To control your product, use simple voice controls like:
"Alexa, turn ON / OFF the fan."
"Alexa, set speed on the fan to TURBO / HIGH / MEDIUM / LOW."
"Alexa, INCREASE / DECREASE the speed on the fan."
"Alexa, START/STOP oscillation." or "Alexa, turn oscillation on the fan ON/OFF."
"Alexa, set turn off time 3/6/9/12 hours."
"Alexa, set turn off time OFF."
You can also use the Amazon Alexa app as a remote control for your OSCR37 AE. See app for details.
You can unplug fan from wall to immediately disconnect from Alexa device control. Follow FACTORY RESET instructions
(page 10) to permanently disconnect device from network, if needed.
12 English
CLEANING
WARNING: Always unplug device before servicing or cleaning to avoid possible injury due to remote activation of the product.
Because your tower moves a substantial amount of air, it will need
regular cleaning. If service is required, return your tower to Vornado
(see WARRANTY for instructions).
WARNING: To reduce the risk of electrical shock and injury to
persons, unplug the tower before cleaning.
1. Unplug tower before cleaning.
2. Use the brush attachment on your household vacuum cleaner to
vacuum any accumulated dust off the tower.
3. Wipe down the entire tower with a soft cloth.
Note: Do not use gasoline, thinners, solvents or other chemicals for
cleaning. The motor is permanently lubricated and requires no oiling.
13
English
Publicidad
