cecotec COOLMARKET COOLMARKET SBS 430 WHITE E Manual Del Usuario página 62

ENGLISH
with the wall or if the wall turns black due to air convection around the compressor, keep the
refrigerator further away from the wall.
The installation of the refrigerator may cause noise interference or image problems in mobile
phones, landline phones, radio receivers, or televisions near the refrigerator, so in this case,
keep the refrigerator as far away from these objects as possible.
4. OPERATION
Fig. 3 Control panel
1. Freezer-compartment icon
2. Smart icon
3. Inverter icon
4. Fast Freeze icon
5. Temp. button Zone
6. Function button
7. Unlock button
8. Refrigerator-compartment icon
9. Digital temperature indicator
10. Temp. button
11. OK button
When you connect the refrigerator to the power supply for the first time, all icons on the
display will light up for 2 seconds, and the system will activate the Smart function by default.
When all doors are closed, the display will automatically switch off if no button is pressed
within 3 minutes. The display will light up if you open a door or press a button. Please note that
the child lock is activated after 3 minutes of inactivity, so the buttons will be inactive until you
deactivate the child lock.
The Inverter icon will light up when the refrigerator is connected to the mains and the
compressor starts.
Functions
Temperature setting
Setting the refrigerator compartment temperature
Press the Temp. button. until the refrigerator compartment icon starts flashing, then press
the Temp. button to select the desired temperature; finally, press the OK button to confirm the
setting.
The temperature setting cycles of the refrigerator compartment are:
5℃→6℃→7℃→8℃→OFF→2℃→3℃→4℃→5℃
62
02437_02438_02439_Bolero CoolMarket SBS 430 White/Inox/Dark E_IM_YV_01230110.indd 62 02437_02438_02439_Bolero CoolMarket SBS 430 White/Inox/Dark E_IM_YV_01230110.indd 62 11/1/23 13:08 11/1/23 13:08