cecotec COOLMARKET COOLMARKET SBS 430 WHITE E Manual Del Usuario página 63

OFF means the refrigerator compartment is off, and when you activate this function, the
refrigerator will stop cooling.
Make sure you remove all the food from the refrigerator compartment before setting this
function.
Setting the freezer compartment temperature
Press the Temp. button. until the freezer compartment icon starts flashing, then press the
Temp. button to select the desired temperature; finally, press the OK button to confirm the
setting.
The temperature setting cycles of the freezer compartment are:
-18℃→-17℃→-16℃→-24℃→-23℃→-22℃→-21℃→-20℃→-19℃→-18℃
Fast freeze
When you activate the fast freeze function, the freezer-compartment temperature will be set
to -32°C automatically. The fast freeze function is used to prevent loss of nutritional quality
and to preserve the freshness of the food.
You cannot modify the temperature of the freezer compartment in the fast freeze
function.
Activating the fast freeze function
Press the Function button until the fast freeze icon starts flashing, then press the OK button
within 5 seconds to confirm your choice. If you do not press the OK button within 5 seconds,
this function will not be activated.
Deactivating the fast freeze function
After 26 hours of operation, the fast freeze function will be automatically deactivated.
With the fast freeze function activated, press the Function button until the fast freeze icon
starts flashing, then press the OK button to confirm and the fast freeze function will be
deactivated.
When you activate the Smart function, the fast freeze function deactivates automatically.
Smart
When you activate the Smart function, the temperature in the refrigerator compartment will
be set to 5°C and the temperature in the freezer compartment will be set to -18°C, so that food
will be preserved in the best possible conditions and the refrigerator will operate as efficiently
as possible.
If the Smart function is active, the temperature in both compartments cannot be changed.
Activating the Smart function
Press the Function button until the Smart icon starts flashing, then press the OK button within
5 seconds to confirm your choice. If you do not press the OK button within 5 seconds, this
function will not be activated.
02437_02438_02439_Bolero CoolMarket SBS 430 White/Inox/Dark E_IM_YV_01230110.indd 63 02437_02438_02439_Bolero CoolMarket SBS 430 White/Inox/Dark E_IM_YV_01230110.indd 63
BOLERO COOLMARKET SBS 430 WHITE / INOX / DARK E
ENGLISH
63
11/1/23 13:08 11/1/23 13:08