GF U1000 V2 Wallmount WM Instrucciones De Uso página 27

User Manual
6.3 Changing the selection in menus
NOTICE
The procedure for changing the preset values is the same for all menus.
► Open the password-protected menu.
► For example, select the Flow Units parameter.
The current value (l/min) flashes
► Press the button.
The value (l/s) flashes.
► Press the button.
The new value (l/s) is stored and the next screen is displayed.
6.4 Changing the numerical values in data menus
NOTICE
The procedure for changing numerical values is the same for all menus.
In this example, the preset value for the flow at maximum current is changed from 1,000 l to 1,258 l.
► Open the password-protected menu.
► As an example, select the parameter for the flow at maximum current.
The tens of thousands digit (01000.0) flashes
► Press the button twice.
The hundreds digit (01000.0) flashes.
► Press the button twice.
The flashing hundreds digit (01000.0) changes to 2.
► Press the button.
The tens digit (01200.0) flashes.
► Press the button five times.
The flashing tens digit (01200.0) changes to 5.
► Press the button.
The ones digit (01250.0) flashes.
Flow Units:
4-20mA
1/min | 1/s
PULSE
Flow @ 20 mA :
4-20mA
01000.0
PULSE
Password-protected menus
27