BRAND Transferpettor micro Instrucciones De Manejo página 41

a.
1
c.
Insert new capillary
a.
1
997916
a. Loosen the union nut (half turn).
b. Pull off the front fragment (1) from
the seal.
c. Pull rear fragments from holder, wrap
in cloth, and crush with pliers.
d. Insert new capillary.
a. Push the capillary up to the stop (1).
b. Tighten the union nut by hand.
c. Check correct seating/attachment of
the capillary through the inspection
window.
The color marking (color code) of the
pipette button, the capillaries, and the
accessories must match.
NOTICE
Operating manual
41