Publicidad
Idiomas disponibles
Idiomas disponibles
IMPORTANT PRECAUTIONS
Before using this ceiling fan with lighting, read these instructions carefully and follow them exactly.
1. Input voltage of this product: 220 V-240 V/50 Hz.
2. If you do not have sufficient knowledge of electrical equipment, hire an experienced
professional.
3. Before installing and removing the ceiling fan, turn off the power first. Installation must be done in
this order: ground wire, phase, neutral wire. Before disassembly, the neutral wire, phase, and
ground wire must be removed in the order: neutral wire, phase, and ground wire to prevent
electric shock.
4. The ceiling fan must be installed on a fixed ceiling and the ceiling fan location must be able to
support a weight greater than 60 KG.
5. All screws must be securely fastened when installing the ceiling fan.
6. The blade angle and elevation are determined after many repeated measurements, so
they cannot be changed arbitrarily. Special care must be taken when installing the blade
to avoid collision. If the blade angle and elevation are deformed, the ceiling fan will vibrate.
TOOLS REQUIRED
Flat open-ended wrench no.
10 mm (for mounting
concrete)
CONTENTS OF THE PACKAGE
Before installing the ceiling fan, please check that the following accessories are included in the box.
If nothing is missing, you can install it.
1x Mount cover
1x Mountingplate
5x Double-sided
blades
Flat
screwdriver
1 x Extension rod 25 cm
1x Extension rod with joint 15 cm
1x Board + LED
1x Instructions
Cross
Telescopic ladder
screwdriver
1x Clutch cover
1x Shade
27
Impact drill (for
mounting into concrete
1x Motor
1x Remote control
1x set of screws
+ 1x balancing
+ 1x Receiver
set
)
Publicidad
