Publicidad
Idiomas disponibles
Idiomas disponibles
5. Receiver installation
Remove the receiver from the package and insert it into the space between the mounting plate and the
ceiling. Connect the appropriate connectors to each other (1 connector on the receiver input, 2
connectors on the receiver output, 2 connectors on the ground cable).
6. Installing the mount cover
Loosen the two screws pre-installed on the mounting plate so that they match the two holes on the cover
(Figure 4). Insert the mount cover and screw it back in.
7. Installing the double-sided blades
a) Remove the screws on the motor (3 times 5) and save them for the next step (Figure 5).
b) Select the side of the blade according to the color, insert through the motor cover and screw it
in. Make sure that all screws are tightened securely for safety reasons (Figure 6).
31
Publicidad
