Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY INSTRUCTIONS
General Instructions
– To ensure correct operation, the user has to read this instruction manual to make himself
familiar with the handling of the brush cutter. Users insufficiently informed will risk danger to
themselves as well as others due to improper handling.
– It is recommended only to lend the brush cutter to people who have proven to be
experienced with brush cutters. Always hand over the instruction manual.
– First users should ask the dealer for basic instructions to familiarize oneself with the
handling of an engine powered cutter.
– Children and young persons aged under 18 years must not be allowed to operate the
brush cutter. Persons over the age of 16 years may however use the device for the purpose
of being trained only whilst under supervision of a qualified trainer.
– Use brush cutters with the utmost care and attention.
– Operate the brush cutter only if you are in good physical condition. Perform all work calmly
and carefully. The operator has to accept liability for others.
– Never use the brush cutter after consumption of alcohol or drugs, or if feeling tired or ill.
– National regulation can restrict the use of the machine.
Intended use of the machine
– The Brush Cutter is only intended for cutting grass, weeds, Bushes, undergrowth it should not be used for any other purpose such as
Edging or hedge cutting as this may cause injury.
Personal protective equipment
– The clothing worn should be functional and appropriate, i.e. it should be tight-fitting but not
cause hindrance. Do not wear either jewelry or clothing which could become entangled with
bushes or shrubs.
– In order to avoid either head-, eye-, hand-or foot injuries as well to protect your hearing the
following protective equipment and protective clothing must be used during operation of the
brush cutter.
– Always wear a helmet where there is a risk of falling objects. The protective helmet (1) is to
be checked at regular intervals for damage and is to be replaced at the latest after 5 years.
Use only the approved protective helmets.
– The visor (2) of the helmet (or alternatively goggles) protects the face from flying debris and
stones. During operation of the brush cutter always wear goggles, or a visor to prevent eye
injuries.
– Wear adequate noise protection equipment to avoid hearing impairment (ear muffs (3), ear
plugs etc.).
– The work overalls (4) protect against flying stones and debris. We strongly recommend that the user wears work overalls.
– Special gloves (5) made of thick leather are part of the prescribed equipment and must always be worn during operation of the brush
cutter.
– When using the brush cutter, always wear safety shoes (6) with a non-slip sole. This protects against injuries and ensures a good footing.
Transporting the power tool
–To reduce the risk of injure from loss of control and blade or line contact, never carry or
transport your power tool with the cutting attachment moving.
–It may be carried only in a horizontal position. Grip the shaft in a manner that the machine is
balanced horizontally. Keep the hot muffler away from your body.
Starting up the brush cutter
– Please make sure that there are no children or other people within a working range of 15
meters (50ft), also pay attention to any animals in the working vicinity.
– Before use always check that the brush cutter is safe for operation: Check the security of the
cutting tool, the control lever for easy action and check for proper functioning of the control
lever lock. Check with your dealer for adjustment if in doubt. Rotation of the cutting tool during
idling speed is not allowed. Check for clean and dry handles and test the function of the
start/stop switch.
3
Publicidad
