Publicidad
Idiomas disponibles
Idiomas disponibles
–Position wing screw (8) in threaded insert in handle support (7) –against
pressure of spring (5).
–Position the clamp moldings so that the tabs (9) on the lower clamp molding (6)
line up with the slots (10) in the handle support (7).
–Rotate wing screw clockwise until the lower clamp molding (6) butts against the
handle support (7).
Only tighten the wing screw moderately.
–Fold the grip of the wing screw down so that it is flush.
–Transport position
Loosen the wing screw (8) and unscrew it until the handlebar (2) can be turned
clockwise. Turn the handlebar 90° and then swing the handles down. Tighten
down the wing screw (8) firmly.
–Working position
Reverse the sequence described above to swing the handles up and turn the
handlebar counterclockwise.
8
Publicidad
