Publicidad
Idiomas disponibles
Idiomas disponibles
commencing work. Particular attention is to be paid to the cutting blades which must be correctly sharpened.
– Turn off the engine and remove the spark plug connector when replacing or sharpening cutting tools, and also when cleaning the cutter or
cutting tool.
Never straighten or weld damaged cutting tools.
– Operate the brush cutter with as little noise and contamination as possible. In particular, check
the correct setting of the carburetor.
– Clean the brush cutter at regular intervals and check that all screws and nuts are well
tightened.
– Never service or store the brush cutter in the vicinity of open flames.
– Always store the brush cutter in locked rooms and with an emptied fuel tank.
– When cleaning, servicing and storing the equipment, always attach the cover to the cutting blade.
Observe the relevant accident prevention instructions issued by the relevant trade associations and by the insurance companies.
Do not perform any modifications on the brush cutter as this will endanger your safety.
First Aid
In case of accident, make sure that a first-aid box is available in the vicinity of
the cutting operations. Immediately replace any item taken from the first aid box.
When asking for help, please give the following information:
– Place of accident
– What happened
– Number of injured persons
– Kind of injuries
– Your name
Vibration
– People with poor circulation who are exposed to excessive vibration may experience injury to blood vessels or the nervous system.
Vibration may cause the following symptoms to occur in the fingers, hands or wrists: "Falling asleep" (numbness), tingling, pain, stabbing
sensation, alteration of skin color or of the skin. If any of these symptoms occur, see a physician!
– To reduce the risk of "white finger disease", keep your hands warm during operation and well maintain the equipment and accessories.
TECHNICAL DATA
Model
Engine model
Volume (fuel tank) ( L)
Engine displacement （cc） 42.7
Maximum output(kW/r/min)
Fuel ratio
Idling speed (r/min)
Ignition mode
Starting mode
Net weight(kg)
Dimensions (mm)
CG430EV
1E40FE
0.95
1.2/7000
30:1
2900±150
CDI
Recoil starting
9.6
1820×300×（300+115）/2
CG520EV
1E44FE
0.95
51.7
1.4/7000
30:1
2900±150
CDI
Recoil starting
9.7
1820×300×（300+115）/2
6
Publicidad
