Lenco CR-550 Manual Del Usuario página 8

SET TIME/YEAR/MONTH/DAY
1. Power on the unit, the display will blinking, now into the TIME SET mode, press
[HOUR/SKIP-] button to set the hour, press [MIN/SKIP+] button to set the minutes, press
[CLOCK/MEM.] button confirm the time set then into the YEAR SET mode (year range:
2017-2099), press [HOUR/SKIP-] button decrease the year, press MIN/SKIP+] button
increase the year, press [CLOCK/MEM.] button confirm the year set then into the
MONTH/DAY SET mode, press [HOUR/SKIP-] button increase the month and press
[MIN/SKIP+] button increase the day, press [CLOCK/MEM.] button confirm the month/day
set then exit the time set mode. The unit will auto-exit the set mode if you not press any
buttons for 5 seconds
2. Under standby mode, press and hold [CLOCK/MEM.] button for 2-3 seconds, the LED will
start blinking, the unit enters time set mode. Setting method same as above
ALARM SET
1. Under standby mode, press and hold [AL.1/VOL-] button, the "AL.1-BUZZ" indicator and
time will blinking, the default alarm time is 08:00AM, press [HOUR/SKIP-] button adjust the
hour, press [MIN/SKIP+] button adjust the minute, press [AL.1/VOL-] button confirm the set
then into the repeat date set, press [HOUR/SKIP-] button and [MIN/SKIP+] button can select
"WEEK 1-7", "WEEK 1-5", "WEEK 6-7", press [AL.1/VOL-] button confirm the date set then
into volume set, press [HOUR/SKIP-] button and [MIN/SKIP+] button can select "0-16"
volume levels (the default volume is 10 level), press [AL.1/VOL-] button confirm the volume
set then exit the set mode, the alarm will be activated when time out.
Remark: Can only have the volume set when alarm the radio, no volume set when alarm
BUZZ, the volume can't gradually increase when alarm BUZZ, but volume can gradually
increase from 0 level to the set volume level when alarm radio
2. Under standby mode, press [AL.1/VOL-] button can select BUZZER→RADIO→ALM OFF. If
you not press the [AL.1/VOL-] button for 5 seconds, the unit will auto confirm the alarm and
exit the set mode
3. When the alarm is activated, if not press any buttons, the alarm will auto-stop after
continued for 1 hour, press [AL. OFF/POWER] button can turn off the alarm. The related
indicator will blinking when the alarm is activated
4. Alarm 2 set same as Alarm 1
SNOOZE FUNCTION
When alarm is activated, press [SNOOZE/SLEEP] button into snooze mode, the alarm will be
activated again after 9 minutes, continued for 60 minutes, press [AL. OFF/POWER] button to
turn off the alarm
8