Technical Data - Abus HDCC41500 Manual De Instrucciones

8. Technical data

Model number
Dimensions (H x)
Connections
Resolution
Operating temperature
Image sensor
Pixels (effective)
Frame rate
Electronic shutter regulation
Backlight compensation
Weight
Horizontal angle of view
IR LEDs
IR range
Camera type
Humidity
Minimum illumination (colour)
Minimum illumination (B/W)
Minimum illumination (IR)
Lens
Noise reduction
Protection class
Power supply
Power consumption
Day/night switching
Video system
The IR range is strongly dependent on the environmental conditions. If the area in
the camera's field of view reflects poorly or if there are no objects within the max.
illumination range, the brightness of the video image at night may be too low. This
will result in poor usability of the video image.
In addition, when installing the camera it must be ensured that no objects are located
in close proximity to the camera's field of view (e.g. roof gutter or wall). These
objects can reflect back the IR light, resulting in circular fading on the video image in
the opposite direction to the object.
HDCC41500
149.5 x 70 mm
Video signal (BNC), power supply (DC)
720p
-20°C–50°C
1/3 inch progressive scan CMOS
1280 (H) x 720 (V)
25 fps (PAL)/30 fps (NTSC)
1/25 s to 1/50,000 s
Yes
400 g
76.88°
24
10 m
Mini tube
Max. 90%
0.01 Lux
0.01 Lux (image integration on)
0 Lux
3.6 mm, fixed lens
2D DNR, 3D DNR
IP 66
12 V DC ± 10%
Max. 300 mA (max. 3.5 W)
Electromechanical IR cut filter
HD-TVI
24
English