Publicidad
Idiomas disponibles
Idiomas disponibles
STARTING AND STOPPING PROCEDURE
Before Starting The Engine: Fill the fuel tank as instructed in the BEFORE OPERATION section
of this manual. Rest the Hedge Trimmer on the ground. Make sure that the cutting blades are
clear of branches, shrubs, debris, etc. Keep all bystanders, children and animals away from the
working area.
STARTING THE ENGINE
The carburetors on MARUYAMA engines contain a choke
system.
1. Push and release the fuel primer bulb located on the
bottom of the carburetor until air bubble free fuel is
seen flowing through the clear fuel return hose back to
the fuel tank.
2. Move the choke lever to the closed position "
When the engine is warm, move the choke lever to the
open position " ".
3. Set the engine stop switch to the "ON" position.
4. Lock the throttle trigger in the fast-idle start position.
Before starting the engine, place the machine on the ground and make sure the blade is
free from branches and stones.
priMer BulB
puMp
".
on
｜ 16 ｜
Choke leVer
fuel-return line
off
H23D H23DL
fast-idle loCk
fast-idle
position
idle position
English
Publicidad
