Specifications - WIKA 116.15 Manual De Instrucciones

9. Specifications

9. Specifications
Specifications
Nominal size in mm
(NS)
EN
Accuracy class
Maximum pressure
limitation
Permissible tempera-
ture range
Temperature effect
Ingress protection per
EN/IEC 60529
Process connection
Material
Connection location
Connection
Pressure element
Dial
Pointer
Case
Window
1) Including non-linearity, hysteresis, zero offset and end value deviation
16
Model 116.15
NS 36, 41
36, 41
4.0
1)
Steady: 3/4 x full scale value
Short time: Full scale value
Ambient: -20 ... +60 °C
Medium: -20 ... +60 °C
Storage: -40 ... +70 °C
max. ±0.4 %/10 K of the span
When the temperature of the measuring system deviates from the refer-
ence temperature (+20 °C)
IP65
Copper alloy
Centre back mount
G 1/8 B male thread,
SW 12
Copper alloy (CuBe2),
spiral form
Plastic, white, black
lettering
Indication angle
120° ±15°
Copper alloy, black
Stainless steel
Polycarbonate, clear
Model 116.18
NS 23
23
5.0
IP67
Copper alloy,
nickel-plated
Centre back mount
M10 x 1.25 male
thread, SW 22
Copper alloy, helical form
Aluminium, white,
black lettering,
indication angle
120 ° ±15 °
No separate pointer available; pointer is
represented by tube end
Copper alloy,
nickel-plated
WIKA operating instructions models 116.15 and 116.18
NS 36, 41
36, 41
4.0
IP65
Copper alloy,
Centre back mount
G 1/4 B male thread,
SW 14
Plastic, white, black
lettering, coloured
segments to
customer require-
ments, indication
angle 120 ° ±15 °
Stainless steel