Lenco DIR-165 Manual Del Usuario página 17

broadcost with radio transmissions. Network uses a time signal sent from the internet radio portal
when in any network-connected mode.
1. Select Update from DAB, update from FM, update from Network or No update.
2. If you are updating from the network, set your time zone.
3. If your country uses a daylight saving, the automatically updated time from the network may be
wrong by one hour. When daylight saving adjustments is in effect, such as British Summer Time
(BST), turn on the Daylight savings option to rectify this.
Note that if you are updating the time from DAB or FM, the Daylight savings option has no effect
on the clock's time. Radio will auto-update from the selected source when time information is
available.
5.4.3. Set format
Allows you to change between 12 and 24 hour display.
5.4.4. Set timezone
Allows you to choose the timezone you belong to.
5.4.5. Daylight savings
Allows you to choose ON or OFF of your daylight savings.
5.5. Language
The default language is English. TO change, selec Menu > System settings > Languages > the select
your language
5.6. Factory reset
A factory reset resets al user settings to default values, so time/date, network configuration and
presets are lost. However, the radio's current software version is maintained.
To perform a factory reset, select Menu > System settings > Factory reset Proceed > Yes.
5.7. Software update
From time to time, upgrades will come available with bug fixes and/or additional features. You can
either check manually, or set radio to check automatically (this is default). If the radio detects that a
new software is available, it will ask you to install the update. If you agree, the new software will be
downloaded and installed. All user settings are maintained during a software update.
CAUTION: Before starting a software upgrade, ensure that the radio is plugged into a stable mains
power connection. Disconnecting power during software update may permanently damage the
unit.
5.8. Setup wizard
This allows you to run the Setup wizard at any time. The wizard guides you through the essential
settings in the following order:
17