9. Specifications
8.3 Disposal
Incorrect disposal can put the environment at risk.
Dispose of instrument components and packaging materials in an environmentally
compatible way and in accordance with the country-specific waste disposal regulations.
9. Specifications
Specifications
Nominal size in mm
Indication accuracy
Scale range
Permissible temperatures
Ambient
■
Case
■
Measuring line
■
- Plastic covered
- Copper braided
- Stainless steel
Scale length
Measuring principle
Measuring line outlet
Length of the measuring
line
Contact
Switch rating
Switch point
Switch back hysteresis
Electrical connection
Mounting option
Ingress protection
Case
■
Terminals
■
Terminals with the use of
■
the protection cap
For further specifications see WIKA data sheets TV 28.03, TV 28.04 and the order
documentation.
WIKA operating instructions models SB15, SW15
Models SB15, SW15
60, 72 x 72, 80, 100, 96 x 96
Class 2 per DIN EN 13190
0 ... 400 °C
0 ... 60 °C, below 0 °C on request
max. +60 °C
max. +120 °C
max. +350 °C
max. +400 °C
max. 270 °∢
Bourdon tube system
Eccentric back mount
max. 5 m
1 micro switch (single-pole change-over contact)
5 A, AC 250 V
The instruments do not provide for incorporated overcurrent
protectors. In order to prevent the contacts from welding through
overload, suitable protection systems must be implemented by the
operator.
Fixed, factory-set to customer specification
3 % of the scale range
0.8 x 6.3 mm blade terminal or terminal connection
Panel mounting with mounting bracket
■
Panel mounting flange
■
At the front: IP53
IP00
IP54
EN
23