Sonel KT-128 Manual De Uso página 33

3.1 Turning the camera ON/OFF
In order to switch the camera on, press and hold
more than 3 sec. The camera will display the welcome logo and
commence the start-up, including the self-check. After completing the
self-check, the camera is ready to work and enters the mode of real-
time display of infrared image.
To switch OFF the camera press and hold
screen goes blank.
In order to obtain the correct indications, the camera must
stabilize them. Stabilization may take ca. 10 minutes after
the instrument is turned on.
3.2 Capturing and saving images

In the real-time image mode, point the camera into the direction of
the tested object.

Press and hold the trigger
to facilitate finding the target (if the laser is turned on - see.
sec. 6).

Release the trigger - the image is frozen.

Select [√] (
ton) to cancel saving.

Then, the camera returns to real-time image mode.
KT-128 ● KT-256 ● KT-256F – USER MANUAL
3 Quick start
button) to save the thermal image or [x] (
- the laser pointer will be activated
button for
button until the
but-
31