WIKA BCS10 Manual De Instrucciones página 10

3. Specifications
Functions
Overpressure protection:
■
Fine pressure adjustment:
■
Measuring rate for pressure: up to 50/s
■
Measuring rate for density:
■
EN
Memory:
■
Data logger:
■
Voltage supply
Power supply:
■
Battery life:
■
Battery status display:
■
EU declaration of conformity
EMC directive
■
Pressure equipment directive
■
RoHS directive
■
R&TTE directive
■
EN 300 328, harmonised frequency range 2,400 ... 2,500 MHz is used; Bluetooth®
Classic, max. transmission power 10 mW. The instrument may be used without limita-
tions in the EU and also CH, NO and LI
Plastic case
Dimensions in mm:
■
Weight:
■
For further specifications see WIKA data sheet SP 60.08 and the order documentation.
10
Adjustable overpressure valve
By means of the fine adjustment valve
up to 3/s
MIN/MAX values
Integrated data logger
Cyclic logger: Automatic recording of up to 1,000,000
values
Cycle time: Selectable from 1 ... 3,600 s in steps of 1
second or by measuring rate in the following
increments:
Density measurement: 1/s, 3/s
Pressure measurement: 1/s, 3/s, 10/s and 50/s
"myWIKA device" app is recommended for using the
data logger function
3 x 1.5 V AA alkaline batteries
Typically 2,000 ... 2,500 h (without backlighting and WIKA-
Wireless not active)
Symbol display with 4 bars indicates the battery status in 25
% steps
395 x 295 x 106
approx. 4 kg (with contents)
WIKA operating instructions calibration system, model BCS10