Dismounting, Return And Disposal - WIKA BCS10 Manual De Instrucciones

9. Dismounting, return and disposal

9. Dismounting, return and disposal
EN
9.1 Dismounting
Only dismount measurement setups once the system has been depressurised!
9.2 Return
When returning the instrument, use the original packaging or a suitable transport
packaging.
To avoid damage:
1. Wrap the calibration system in an antistatic plastic film.
2. Place the calibration system, along with shock-absorbent material, in the packaging.
Place shock-absorbent material evenly on all sides of the transport packaging.
3. If possible, place a bag containing a desiccant inside the packaging.
4. Label the shipment as carriage of a highly sensitive measuring instrument.
9.3 Disposal
Incorrect disposal can put the environment at risk.
Dispose of instrument components and packaging materials in an environmentally
compatible way and in accordance with the country-specific waste disposal regulations.
20
WARNING!
Residual media on the calibration system can result in a risk to persons,
the environment and equipment.
Take sufficient precautionary measures.
WARNING!
Strictly observe the following when shipping the instrument:
All instruments delivered to WIKA must be free from any kind of hazar-
dous substances (acids, bases, solutions etc.).
Information on returns can be found under the heading "Service" on our
local website.
This marking on the instruments indicates that they must not be disposed
of in domestic waste. The disposal is carried out by return to the manufac-
turer or by the corresponding municipal authorities (see EU directive
2002/96EC).
WIKA operating instructions calibration system, model BCS10