Scope Of Delivery; Overview - WIKA CTD9100-ZERO Manual De Instrucciones

3. Design and function

3.2 Scope of delivery

The temperature dry-well calibrator is delivered in special
protective packaging. The packaging must be set aside
so that the calibrator can be sent safely back to the
manufacturer for recalibration or repair.
Temperature dry-well calibrator
■
1.5 m (5 ft) power cord with mains plug
■
Operating instructions in German and English language
■
Calibration certificate 3.1 per to DIN EN 10204
■
Cross-check scope of delivery with delivery note.
WARNING!
Damage through incorrect power cord
If a third-party power cord is used, incorrect
voltages can occur at the instrument.
▶
Only ever use the power cord supplied.

3.3 Overview

The calibrator consists of a robust, grey-blue painted steel
case, with a carrying handle on top.
The rear part of the case includes a metal block with seven
bores for the test items, accessible from the top.
The metal block incorporates the heating or cooling elements
and the temperature sensor for determining the reference
temperature.
The metal block is thermally insulated.
The front part of the case contains the complete electronic
unit for controlling the reference temperature.
Solid state relays (SSR) are used to control the heating and
cooling elements.
On the front panel is the controller, which is fitted with a
4-digit, high-contrast LED display for the reference and set
temperature.
WIKA operating instructions temperature dry well calibrator, model CTD9100-ZERO
Fig. 1: Temperature dry-well calibrator
Fig. 2: Temperature block with seven test bores
EN
7