Descargar Imprimir esta página

Woods SW20FW Manual De Instrucciones página 5

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 52
Electrical connection
WARNING
Risk of fire and electrical shock.
The appliance must be connected
to a grounded outlet.
Make sure that the electrical
information on the rating label is in
accordance to the power supply. If
not, contact an electrician.
Always use a correctly installed
shockproof socket.
Do not use multi-plug adapters
and extension cables.
Make sure not to cause damage
to the electrical components (e.g.
plug, cable).
Contact the Authorised Service
Centre or an electrician to change
the electrical components.
The cable must stay below the
level of the plug.
Connect the plug to the power
socket only at the end of the
installation.
Make sure that there is access to
the plug after the installation.
Do not pull the power cable to
disconnect the appliance. Always
unplug the power cable from the
plug only.
Use
WARNING
Risk of injury, burns, electrical
shock or fire.
Do not change the specification of
this appliance.
03
Be careful not to cause damage to
the refrigerant circuit. It contains
propane (R290), a natural gas with
a high level of environmental
compatibility. This gas is
flammable.
If damage occurs to the refrigerant
circuit, make sure that there are no
flames and sources of ignition in
the room. Ventilate the room.
Do not put flammable products or
items that are wet with flammable
products near or on the appliance.
Disposal
WARNING
Risk of injury.
Disconnect the appliance from the
mains supply.
Cut off the mains cable and discard
it.
The refrigerant circuit of this
appliance is ozone-friendly.
Contact your local authority for
information on how to discard the
appliance correctly.
Do not cause damage to the part
of the cooling unit that is near the
heat exchanger.
Operating Instructions
GB
5

Publicidad

loading