Publicidad
Idiomas disponibles
Idiomas disponibles
A
Using the appliance
the hood, and then fix the screws to tighten the hood onto the wall.
8. Put the one way valve onto the cooker hood.
Pic 2
Method B See Pic3:
1. Drill 4 holes of Ø 6mm at the bottom of the hanging cupboard.
2. Put the one way valve on the air outlet of cooker hood, then install the cooker hood on the
bottom of the cupboard, tighten the cooker hood with enclosed 4 screws.
3. Install the adjusted board on the bottom of the hood in order to keep out the gap between
hood back and cupboard.
Pic 3
Noice: There are 2 methods for ventilation, including ' horizontal ventilation' and 'vertical
ventilation'. Pay attention to the ventilation method when installing.
5
EN
Publicidad
