Publicidad
Idiomas disponibles
Idiomas disponibles
20. INSTALLING ELECTRICAL BACK COVER
Parts Required :
1
x
Electric Wires Back Cover (#41)
1
x
Cart Assembly
M6x15 mm Screws (#A)
2
x
Installation :
•
Unscrew two M6x15 mm Screws (factory pre-
assembled) from Bottom Table. Attach Electrical Back
Cover to the back side of the Smoker Cart Assembly,
using the screws on top side first, and then assemble
the bottom screws after.
Use: 2 pcs M6x15 mm Screws .
See Fig. 20.
Note: Assemble the screws on top side first and then
assemble the bottom screw later.
21. MOUNTING SMOKER AIR DAMPERS
Parts Required :
Smoker Top Air Dampers (#31)
2
x
1
x
Smoker Cabinet Assembly (#32)
8
x
M5x10 mm Shoulder Bolts (#H)
Installation :
•
Mount Smoker Top Air Damper to the Smoker
Cabinet Assembly.
Use: 8 pcs M5x10 mm Shoulder bolts
See Fig. 21.
22. ATTACHING SMOKER AIR DAMPERS HANDLE
Parts Required :
2
x
Smoker Air Damper Pull Handle Assembly (#18)
2
x
Smoker Top Air Dampers (#31)
Installation :
•
Attach two Smoker Air Damper Pull Handel Assembly
to two Smoker Top Air Dampers.
See Fig. 22.
18
FIG. 20
A
A
A
FIG. 21
H
31.1
H
H
FIG. 22
18
18
A
A
A
41
41
41
32
H
31.2
31
18
18
Publicidad
