Ultenic D6S Manual De Instrucciones página 10

PRODUCT OPERATION
Before Using
Before use, remove all protective parts from
the robot and charging station.
1. Assemble the charging station.
2. Set up the charging station.
3. Install side brush.
4. Charge robot.
＊ Plug the power cord into the charging station.
The charging station must be placed on a flat
surface against a wall.
＊ Make sure there is enough space (at least 4ft
on the front and at least 1.65ft on the left and
right sides) to ensure the robot returns to the
dock smoothly and automatically.
＊ Do not expose the charging station under
sunlight.
＊ Do not place the charging station on carpet.
＊ Please place the charging station on level
ground.
NOTE: When the robot completes a cleaning
cycle or the battery runs low, it will automatical-
ly return to the charging station. The robot can
also be returned to the station at any time via
the app, or by pressing the �
robot.
Empty the remaining water in the water tank
and remove the mop pad before charging the
robot.
� button on the