Ultenic D6S Manual De Instrucciones página 11

App Connection
To use all available functions, we
recommend using the app to control your
robot.
APP Downloading and Installation
1. Download app from the App Store (for iOS) or
Google Play (for Android).
2. Open the app and create an account.
3. Tap "+" icon to add "D6S" to your account.
4. Follow instructions in the app to set up Wi-Fi
connection.
Before starting, make sure to:
1. Connect your phone to a Wi-Fi network.
2. Activate the 2.4 GHz band on the router.
3. Check whether the wifi indicator light on the
robot is flashing.
Manual connection
1. Press and hold the �
button for 5 seconds until the indicator light
flashes and the network converges.
2. Select the wifi router your phone is
connected to, and enter the password.
3. Go to settings and WLAN list to connect to the
hotspot �Ultenic-XXXX�.
4. Go back to the Ultenic app and complete the
wifi connection.
� button and the � �
Connect via Bluetooth
1. Turn on Bluetooth on your phone and scan
for nearby Bluetooth devices.
2. Select the robot�s model number.
3. Enter the wifi password to complete the
connection.