Ultenic D6S Manual De Instrucciones página 16

MAINTENANCE
Dust Box and HEPA Filter
1. Press the release button and pull out the dust
box
2. Open the cover.
3. Remove the HEPA filter.
4. Tap the HEPA filter to remove dust.
5. Rinse the dust box and HEPA filter with water.
6. Before the next use, please completely air dry
the dust box and HEPA filter. If the original
HEPA filter is not completely dry, replace it.
7. Put the HEPA filter back in the dust box.
8. Reinsert the dust box into the robot.