Progress Lighting AirPro P250073 Manual De Instalación página 7

Attaching the Fan Blades
1. Attach the blades to the flywheel by
aligning the notches on the blades with
alignment post on the flywheel and put
the blade on to the flywheel. Secure with
screws but do not tighten. (Figure 5)
2. Repeat these steps for remaining blades.
3. Put the flywheel upside as shown (Fig.
6). Attach the finial to the bottom of the
flywheel aligning the screw holes of the
finial with the holes of the blade, secure
with screws and tighten. (Figure 6)
4. Securely tighten the screws mentioned is
step 1.
Screws
Blade
Flywheel
Figure 5
Screws
Finial
Figure 6
4.