Descargar Imprimir esta página

WAGNER MHT3300 Manual Del Propietário página 2

Publicidad

Idiomas disponibles

Idiomas disponibles

General Description
This heat gun is a quality power tool. Like any power tool, it can be dangerous when
misused. Read the following instructions carefully and follow all safety precautions. It is
the responsibility of the owner to use the heat gun properly.
Specifications
Housing: ............................Engineered high-impact corrosion and heat-resistant polymers
Wattage: ...............................................1500 watts on highest setting, 150 watts on lowest
Heat Output: ......Approximately 1350°F on highest setting, approximately 250°F on lowest
BTU: ..............................................................Approximately 5100 BTUs on highest setting
Weight: .............................................................................................................. 1.5 pounds
Uses
• Soften paint, caulking and putty for easier removal
• Soften adhesives to help remove floor tiles
• Bend plastic pipes
• Shrink tubing for electrical work
• Shrink plastic film for wrapping or weatherproofing
• Loosen rusted nuts, bolts and fittings
Touch pad
The electronic touch pad gives you a wide temperature range to choose from, depending
upon the type of project.
POWER
Power
Temperature
button
selector
Power button: Turns the heat gun ON and OFF
Select button: Determines the temperature range and fan speed of the heat
Temperature selectors: Sets the temperature within the HIGH or LOW temperature
Mode indicator: Shows the temperature range in which you are operating
Temperature indicator: Shows the current heat output of the heat gun
2
English
HIGH
LOW
COOL
HIGH
SELECT
LOW
Select
button
gun, or switches the heat tool into cool down mode.
ranges
Temperature
The temperature
indicator (6)
indicators will light up
sequentially as you
temperature. The
lighted indicator
Mode
farthest to the right will
indicator
reflect the current
temperature setting.
IMPORTANT!
increase the

Publicidad

loading