Descargar Imprimir esta página

DeWalt DW006 Manual De Instrucciones página 12

Ocultar thumbs Ver también para DW006:

Publicidad

Idiomas disponibles

Idiomas disponibles

All manuals and user guides at all-guides.com
turning clockwise (left-hand-thread). Place hex key in chuck and
tighten. Using a wooden mallet or similar object, strike key sharply in the
counterclockwise direction. This will loosen the chuck so that it can be
unscrewed by hand.
Chuck Installation
FIG. 5
Screw the chuck on by hand as far as it will go and insert screw (LH
thread). Tighten the chuck around the shorter end of a 1/4" or larger
hex key (not supplied) strike the longer end in the clockwise direction
with a wooden mallet, as shown in FIG. 6. Tighten the screw by turning
in a counterclockwise direction.
MAINTENANCE
Cleaning
With the motor running, blow dirt and dust out of all air vents with dry
air at least once a week. Wear safety glasses when performing this task.
Exterior parts may be cleaned with a damp cloth and mild detergent.
Although these parts are highly solvent resistant, NEVER use solvents.
Lubrication
Self-lubricating bearings are used in this tool and periodic relubrication
is not required. In the unlikely event that service is ever needed, take
your tool to a D
WALT service center.
E
Accessories
Recommended accessories for use with your tool are available at extra
cost from your local service center.
CAUTION: The use of any non-recommended accessory may be
hazardous.
A complete listing of service centers is included with your tool. If you
need assistance in locating any accessory, please contact D
D
WALT Industrial Tool Co., 701 East Joppa Road, Baltimore, MD
E
21286 or call 1-800-4 D
Repairs
To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustment (including brush inspection and replacement) should
be performed by authorized service centers or other qualified service
organizations, always using identical replacement parts.
Three Year Limited Warranty
D
WALT will repair, without charge, any defects due to faulty materials
E
FIG. 6
or workmanship for three years from the date of purchase. This
warranty does not cover part failure due to normal wear or tool abuse.
For further detail of warranty coverage and warranty repair information,
visit www.dewalt.com or call 1-800-4-D
warranty does not apply to accessories or damage caused where
repairs have been made or attempted by others. This warranty gives
you specific legal rights and you may have other rights which vary in
certain states or provinces.
In addition to the warranty, D
D
WALT will maintain the tool and replace worn parts caused by
E
normal use, for free, any time during the first year after purchase.
If you are not completely satisfied with the performance of your
D
WALT Power Tool, Laser, or Nailer for any reason, you can return it
E
within 90 days from the date of purchase with a receipt for a full refund
– no questions asked.
FREE WARNING LABEL REPLACEMENT: If your warning labels
become illegible or are missing, call 1-800-4-DEWALT for a free
replacement.
9
WALT (433-9258).
E
WALT (1-800-433-9258). This
E
WALT tools are covered by our:
E
1 YEAR FREE SERVICE
90 DAY MONEY BACK GUARANTEE
walt
E

Publicidad

loading