Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
(Original instructions)
1
Red indicator
2
Button
3
Battery cartridge
4
Star marking
5
Cutting action changing lever
6
Lock-off button
7
Switch trigger
8
Tool opener
9
Blade clamp
10 Jig saw blade
11 Protrusions
12 Base
SPECIFICATIONS
Model
Length of stroke
Max. Cutting capacities
Strokes per minute (min
Overall length
Net weight
Rated voltage
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Specifications and battery cartridge may differ from
country to country.
• Weight, with battery cartridge, according to EPTA-Pro-
cedure 01/2003
Intended use
The tool is intended for the sawing of wood, plastic and
metal materials. As a result of the extensive accessory
and saw blade program, the tool can be used for many
purposes and is very well suited for curved or circular
cuts.
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future refer-
ence.
CORDLESS JIG SAW SAFETY WARNINGS
1.
Hold power tools by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring. Cutting
accessory contacting a "live" wire may make
exposed metal parts of the power tool "live" and
could give the operator an electric shock.
6
Explanation of general view
13 Hex wrench
14 Cover plate
15 Anti-splintering device
16 Dust nozzle
17 Hose for vacuum cleaner
18 Cutting line
19 Bolt
20 Bevel slot
21 Graduations
22 V-notch
23 Gear housing
24 Starting hole
Wood
Mild steel
Aluminum
–1
)
ENE019-1
GEA010-1
GEB045-2
25 Rip fence
26 Fence guide
27 Threaded knob
28 Circular guide pin
29 Rule bar
30 Guide rail adapter
31 Guide rail
32 Screw
33 Limit mark
34 Brush holder cap
35 Screwdriver
BJV140
26 mm
135 mm
10 mm
20 mm
0 – 2,600
255 mm
2.8 kg
D.C. 14.4 V
2.
Use clamps or another practical way to secure
and support the workpiece to a stable platform.
Holding the work by hand or against your body
leaves it unstable and may lead to loss of control.
3.
Always use safety glasses or goggles. Ordinary
eye or sun glasses are NOT safety glasses.
4.
Avoid cutting nails. Inspect workpiece for any
nails and remove them before operation.
5.
Do not cut oversize workpiece.
6.
Check for the proper clearance beyond the work-
piece before cutting so that the blade will not
strike the floor, workbench, etc.
7.
Hold the tool firmly.
8.
Make sure the blade is not contacting the work-
piece before the switch is turned on.
9.
Keep hands away from moving parts.
10. Do not leave the tool running. Operate the tool
only when hand-held.
11. Always switch off and wait for the blade to come
to a complete stop before removing the blade
from the workpiece.
12. Do not touch the blade or the workpiece immedi-
ately after operation; they may be extremely hot
and could burn your skin.
13. Do not operate the tool at no-load unnecessarily.
14. Some material contains chemicals which may be
toxic. Take caution to prevent dust inhalation
and skin contact. Follow material supplier safety
data.
15. Always use the correct dust mask/respirator for
the material and application you are working
with.
SAVE THESE INSTRUCTIONS.
BJV180
26 mm
135 mm
10 mm
20 mm
0 – 2,600
257 mm
2.9 kg
D.C. 18 V
Publicidad
