Publicidad
Idiomas disponibles
Idiomas disponibles
KPS-LX20 • Digital light meter
(6) Lux/Fc unit conversion key
(7) Compound key for data hold and zero calibration:
- Data hold: Short press the key to enter/exit data hold mode.
- Zero calibration: Long press for 1 second to perform zero calibration function.
(8) Compound key for relative value and peak value measurement:
- Relative value measurement: Short press the key to enter/exit relative value
measurement mode.
- Peak value measurement: Long press for 1 second to enter/ exit peak value
measurement mode.
(9) Key for manual range switching: short press the key for 20.00Lux →
200.0Lux → 2,000Lux → 20,000Lux → 200,000Lux (or 20.00Fc → 200.0Fc →
2,000Fc → 20,000Fc) circulation; long press
3.3.2 LCD display interface
(1) Prompt for manual range switching mode
(2) Prompt for data hold mode
(3) The analog bar shows the current measurement value information.
(4) The digit shows the current measurement value information.
(5) Lux unit
(6) FC unit
(7) Prompt for auto measurement mode
(8) Prompt for peak value measurement mode
(9) Prompt for low battery
30
Publicidad
