Ryobi TSS102L Manual Del Operador página 19

 If the front or back edge of the saw blade angles away
from the square as shown in figures 21 - 22, adjustments
are needed.
 Using the blade wrench provided, loosen the socket head
screws that secure the miter fence to the miter table.
 Rotate the miter fence left or right until the saw blade is
parallel with the square.
 Retighten the screws securely and recheck the blade-to-
fence alignment.
SQUARE
MITER
FENCE
MITER
TABLE
VIEW OF BLADE SQUARE WITH FENCE
MITER
MITER
TABLE
FENCE
VIEW OF BLADE NOT SQUARE WITH
FENCE, ADJUSTMENTS ARE REQUIRED
ASSEMBLY
BLADE
MITER
LOCK HANDLE
Fig. 20
BLADE
SQUARE
Fig. 21
19 − English
MITER
MITER
TABLE
FENCE
VIEW OF BLADE NOT SQUARE WITH
FENCE, ADJUSTMENTS ARE REQUIRED
SCALE
INDICATOR
BLADE
SQUARE
Fig. 22
BEVEL
LOCK KNOB
BEVEL
INDICATOR
SCALE
SCREW
Fig. 23
INDICATOR
SCALE
SCREW
INDICATOR
MITER
SCALE
Fig. 24