Descargar Imprimir esta página

Sanus DLT1 Manual De Instrucciones página 11

Publicidad

Idiomas disponibles

Idiomas disponibles

3.
Remove the wall plate template
CAUTION:
Be sure the anchors are seated flush with the concrete surface.
using four lag bolts and four washers (use only the lag bolts and washers from the Concrete Installation Kit*). Tighten the
15
4.
Install wall plate
lag bolts only until the washers are pulled firmly against the wall plate.
CAUTION:
Avoid potential personal injury or property damage! All four lag bolts MUST BE firmly tightened to prevent unwanted movement
15
of the wall plate
. Ensure the wall plate is securely fastened to the wall before continuing on to the next step.
*
Contact Customer Service at 1-888-333-9952 to have the Concrete Installation Kit shipped directly to you.
3
14
and insert four anchors (Fischer UX 10 x 60R - included in the Concrete Installation Kit*).
*
4
15
*
11

Publicidad

loading