Defrosting regularly helps to lower the energy consumption of
the appliance.
Lamp
This product contains a lamp. In the event of a fault, contact a
qualified technician to inspect and/ or replace the lamp.
1. Set the thermostat control selector to the "OFF" position and
disconnect the refrigerator from the mains supply.
2. Hold and lift up the light bulb cover.
3. Screw the bulb counter-clockwise to loosen it.
4. Replace with a new bulb and screw it down in a clockwise
direction. Make sure that it is secured in the bulb holder.
5. Restore the light cover, connect the refrigerator to the mains
supply and switch it on.
Transportation
Caution! Do not place the appliance upside down or
sideways. During transportation, the appliance inclination
must not exceed 45°.
• Do not lift the appliance by holding the top edges of the
appliance. Hold the appliance by its base or sides.
• Before moving the appliance, remove all food and secure the
components properly.
• Tape the door to secure them.
• Tape the power cord to the side of the appliance to prevent
damage during transportation.
Storage
• If the appliance is not used for an extended period, unplug
it from the power supply, remove all food and clean the
appliance.
• During storage, leave the door slightly open to prevent the
formation of unpleasant odours.
13
EN