Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING
To avoid serious personal injury, do not attempt
to use this product until you read thoroughly and
understand completely the operator's manual. If you
do not understand the warnings and instructions in the
operator's manual, do not use this product. Call Ryobi
customer service for assistance.
WARNING
The operation of any power tool can result in foreign
objects being thrown into your eyes, which can result
in severe eye damage. Before beginning power tool
operation, always wear safety goggles or safety glasses
with side shields and, when needed, a full face shield.
We recommend Wide Vision Safety Mask for use
over eyeglasses or standard safety glasses with side
shields. Always use eye protection which is marked to
comply with EN 166.
WARNING
Long term inhalation of the engine's exhaust fumes,
chain oil mist and sawdust can result in serious
personal injury.
Save these instructions and pass them on if the saw is to
be used by another person.
SPECIFICATIONS
Model name
Description
Weight - no bar, chain, fuel
Fuel tank capacity
Lubricant tank capacity
Bar length
Usable cutting length
Chain pitch
Chain gauge
Chain type
Drive sprocket
Engine displacement
Maximum engine power (ISO
7293)
English (Original Instructions)
RCS5133C
51 cc 33 cm (13'') CE saw
5.3 kg
575 cm 3
350 cm 3
33 cm
305 mm
8.26 mm (0.325")
1.27 mm (0.05")
0.325" low profile full
complement
7 teeth x 0.325''
51 cm 3
2.0 kW
23
Recommended maximum engine
speed with cutting attachment
Recommended engine speed
at idling
Specific fuel consumption at
maximum engine power
Sound pressure level (ISO 22868)
Sound power level (ISO 22868)
Vibration (ISO 22867):
– Front handle
– Rear handle
Bar & Chain
Guide bar (no silkscreen)
– Oregon part number
– Part number
– Color
Chain
– Oregon part number
– Part number
DESCRIPTION
1. Front hand guard/Chain brake
2. Front handle
3. Engine cover
4. Primer bulb
5. Choke lever
6. Chain
7. Starter grip
8. Guide bar
9. Chain catcher
10. Trigger release
11. Chain lubricant cap
12. Silencer
13. Carburettor adjustment
14. Rear handle
15. Throttle trigger
16. Fuel mix cap
17. On/Off switch
18. Starter/Fan housing
19. Spiked bumper
OPERATION
For your safety, study this entire manual before operating
the saw. Pay particular attention to the precautions and
instructions listed in the operator's manual.
11,500 r/min
2,600-3,600 r/min
490 g/kWh
LpAav: 100dB(A), KpA=3
dB(A)
114 dB(A)
Carlton/Oregon
8.12 m/s 2 , K=1.5
8.0 m/s 2 , K=1.5
130MLBK041
308276004
Black
95VPX056P
900920031
Publicidad
