Philips Saeco PICOBARISTO SM3061 Manual Del Usuario página 23

English
22
START
DESCALING?
23 MIN
2
1
CALC
CLEAN
3 When the display asks 'Start descaling?', press the OK button to start the
descaling procedure.
4 The display reminds you that you have to remove the AquaClean filter.
Remove the filter and press the OK button.
Note: You can press the escape button to skip descaling. If you want to
start the descaling procedure later, press the MENU button, select MENU
and scroll to select DESCALING. Press OK to confirm.
5 The display reminds you that you have to empty the drip tray. Press the
OK button to confirm.
6 The display reminds you that you have to insert the milk carafe. Fill the
milk carafe with water halfway, insert the carafe and open the milk
dispensing spout. Press the OK button to confirm.
7 Pour the descaling solution into the water tank. Fill the water tank with
fresh water up to the CALC CLEAN level indication. Place the water tank
back into the machine. Press the OK button to confirm.
-
The first phase of the descaling procedure starts. The machine starts
dispensing the descaling solution at intervals.
-
The display shows the descaling icon, the phase indication and the
duration. This first phase takes 20 minutes.
8 Let the machine dispense the descaling solution until the water tank is
empty.
9 Remove the water tank and rinse it.
10 Fill the water tank with fresh water up to the CALC CLEAN level
indication. Place the water tank back into the machine and press OK.
11 Remove and rinse the milk carafe. Fill the milk carafe with water up to the
MIN level indication. Insert the milk carafe into the machine and open the
milk froth dispensing spout.
12 Remove and empty the container and place it back under the coffee
dispensing spout. Press OK to confirm.
13 The second phase of the descaling procedure starts, which is the rinsing
cycle. This phase takes 3 minutes. The display shows the rinsing icon and
the duration of the phase.
Note: If the water tank is not filled up to the CALC CLEAN level, the
machine may require another rinsing cycle.
14 Wait until the machine stops dispensing water. The descaling procedure
is finished when the tick appears on the display.
15 Press the OK button to exit the descaling cycle. The machine starts
heating up and performs the automatic rinsing cycle.
16 Remove and empty the container.
17 Perform the 'Weekly cleaning of the milk carafe' procedure to clean the
milk carafe after descaling.
18 Clean the brew group by performing the 'Weekly brew group cleaning'
cycle.
19 Install a new AquaClean filter in the water tank.
Tip: Using the AquaClean filter reduces the need for descaling!