Publicidad
Make
CEPSA
REPSOL
ESSO
MOBIL
SHELL
B.P.
8.1 REPLACING AND TIGHTENING THE BELTS
The machines leave the factory with the belts perfectly tightened. It is possible that due to the
incorrect machine installation or long use of the machine, the belts get loose. To tighten back the belt or replace it,
please consider the following steps (Fig.20)
1. Make sure the machine is unplugged from the power supply.
2. Remove the back and front doors of the frame of the machine.
3. Loosen with a key the four screws (A, Fig.20), lo Just enough for the motor to be displaced.
4. Depending on what we want to do, tighten or change the belt, we have to deal with the tightening screws (B,
Fig.20) in a sense or the other. When tightening, make sure all belts have the same tension.
5. Once the belts have been tensed, you can fasten back the screws (A, Fig.20).
6. Place back the front and back doors.
8.2 REPLACING THE BLADES (COMBI MODELS)
If any of the cutting blades is damaged, replace them as to the following procedure: Fig.19
1
CHANGING THE FIXED BLADE. Make sure the machine is unplugged from electricity. Lift the safety
guard off the blades. Afterwards, remove the screws and rotate the blade for a new cutting session or
substitute it with a new blade if necessary.
2
CHANGING THE MOVEABLE BLADE. To change this blade, it is necessary that the connecting rod is
displaces outside its housing. Operate in the following way: with the machine switched on and the
inversion pivot of the bending plate removed from its position, press the pedal and observe the
movement of the blade. When we see that the blade is outside its housing, we depress the pedal. Right
after, we unplug the machine from the electricity to avoid any accident. In this way, we can reach the
screws that fix the blade. Remove the screws of the blade for a new cutting or substitute it with a new
blade if necessary.
CUADRO DE EQUIVALENCIAS DE ACEITES SEGÚN FABRICANTES.
11
TYPE OF OIL
ENGRANAJ. HP-460
SUPER TAURO-460
SPARTAN EP-460
MOBIL GEAR-634
OMALA-460
ENERGOL GR-XP
ENGLISH
Publicidad
